Purge all project images in the container registry.

WARNING: Images that are being used in the Kubernetes cluster will also be deleted.

Syntax

werf purge [options]

Options

      --allowed-docker-storage-volume-usage=70
            Set allowed percentage of docker storage volume usage which will cause cleanup of least 
            recently used local docker images (default 70% or                                       
            $WERF_ALLOWED_DOCKER_STORAGE_VOLUME_USAGE)
      --allowed-docker-storage-volume-usage-margin=5
            During cleanup of least recently used local docker images werf would delete images      
            until volume usage becomes below "allowed-docker-storage-volume-usage -                 
            allowed-docker-storage-volume-usage-margin" level (default 5% or                        
            $WERF_ALLOWED_DOCKER_STORAGE_VOLUME_USAGE_MARGIN)
      --allowed-local-cache-volume-usage=70
            Set allowed percentage of local cache (~/.werf/local_cache by default) volume usage     
            which will cause cleanup of least recently used data from the local cache (default 70%  
            or $WERF_ALLOWED_LOCAL_CACHE_VOLUME_USAGE)
      --allowed-local-cache-volume-usage-margin=5
            During cleanup of least recently used local docker images werf would delete images      
            until volume usage becomes below "allowed-docker-storage-volume-usage -                 
            allowed-docker-storage-volume-usage-margin" level (default 5% or                        
            $WERF_ALLOWED_LOCAL_CACHE_VOLUME_USAGE_MARGIN)
      --config=''
            Use custom configuration file (default $WERF_CONFIG or werf.yaml in working directory)
      --config-templates-dir=''
            Custom configuration templates directory (default $WERF_CONFIG_TEMPLATES_DIR or .werf   
            in working directory)
      --dev=false
            Enable development mode (default $WERF_DEV).
            The mode allows working with project files without doing redundant commits during       
            debugging and development
      --dev-branch-prefix='werf-dev-'
            Set dev git branch prefix (default $WERF_DEV_BRANCH_PREFIX or werf-dev-)
      --dev-mode='simple'
            Set development mode (default $WERF_DEV_MODE or simple).
            Two development modes are supported:
            - simple: for working with the worktree state of the git repository
            - strict: for working with the index state of the git repository
      --dir=''
            Use specified project directory where project’s werf.yaml and other configuration files 
            should reside (default $WERF_DIR or current working directory)
      --disable-auto-host-cleanup=false
            Disable auto host cleanup procedure in main werf commands like werf-build,              
            werf-converge and other (default disabled or WERF_DISABLE_AUTO_HOST_CLEANUP)
      --docker-config=''
            Specify docker config directory path. Default $WERF_DOCKER_CONFIG or $DOCKER_CONFIG or  
            ~/.docker (in the order of priority)
            Command needs granted permissions to delete images from the specified repo
      --docker-server-storage-path=''
            Use specified path to the local docker server storage to check docker storage volume    
            usage while performing garbage collection of local docker images (detect local docker   
            server storage path by default or use $WERF_DOCKER_SERVER_STORAGE_PATH)
      --dry-run=false
            Indicate what the command would do without actually doing that (default $WERF_DRY_RUN)
      --env=''
            Use specified environment (default $WERF_ENV)
      --git-work-tree=''
            Use specified git work tree dir (default $WERF_WORK_TREE or lookup for directory that   
            contains .git in the current or parent directories)
      --home-dir=''
            Use specified dir to store werf cache files and dirs (default $WERF_HOME or ~/.werf)
      --insecure-registry=false
            Use plain HTTP requests when accessing a registry (default $WERF_INSECURE_REGISTRY)
      --kube-config=''
            Kubernetes config file path (default $WERF_KUBE_CONFIG or $WERF_KUBECONFIG or           
            $KUBECONFIG)
      --kube-config-base64=''
            Kubernetes config data as base64 string (default $WERF_KUBE_CONFIG_BASE64 or            
            $WERF_KUBECONFIG_BASE64 or $KUBECONFIG_BASE64)
      --kube-context=''
            Kubernetes config context (default $WERF_KUBE_CONTEXT)
      --log-color-mode='auto'
            Set log color mode.
            Supported on, off and auto (based on the stdout’s file descriptor referring to a        
            terminal) modes.
            Default $WERF_LOG_COLOR_MODE or auto mode.
      --log-debug=false
            Enable debug (default $WERF_LOG_DEBUG).
      --log-pretty=true
            Enable emojis, auto line wrapping and log process border (default $WERF_LOG_PRETTY or   
            true).
      --log-project-dir=false
            Print current project directory path (default $WERF_LOG_PROJECT_DIR)
      --log-quiet=false
            Disable explanatory output (default $WERF_LOG_QUIET).
      --log-terminal-width=-1
            Set log terminal width.
            Defaults to:
            * $WERF_LOG_TERMINAL_WIDTH
            * interactive terminal width or 140
      --log-verbose=false
            Enable verbose output (default $WERF_LOG_VERBOSE).
      --loose-giterminism=false
            Loose werf giterminism mode restrictions (NOTE: not all restrictions can be removed,    
            more info https://werf.io/documentation/advanced/giterminism.html, default              
            $WERF_LOOSE_GITERMINISM)
  -p, --parallel=true
            Run in parallel (default $WERF_PARALLEL)
      --parallel-tasks-limit=10
            Parallel tasks limit, set -1 to remove the limitation (default                          
            $WERF_PARALLEL_TASKS_LIMIT or 5)
      --repo=''
            Docker Repo to store stages (default $WERF_REPO)
      --repo-container-registry=''
            Choose repo container registry.
            The following container registries are supported: ecr, acr, default, dockerhub, gcr,    
            github, gitlab, harbor, quay.
            Default $WERF_REPO_CONTAINER_REGISTRY or auto mode (detect container registry by repo   
            address).
      --repo-docker-hub-password=''
            Docker Hub password (default $WERF_REPO_DOCKER_HUB_PASSWORD)
      --repo-docker-hub-token=''
            Docker Hub token (default $WERF_REPO_DOCKER_HUB_TOKEN)
      --repo-docker-hub-username=''
            Docker Hub username (default $WERF_REPO_DOCKER_HUB_USERNAME)
      --repo-github-token=''
            GitHub token (default $WERF_REPO_GITHUB_TOKEN)
      --repo-harbor-password=''
            Harbor password (default $WERF_REPO_HARBOR_PASSWORD)
      --repo-harbor-username=''
            Harbor username (default $WERF_REPO_HARBOR_USERNAME)
      --repo-quay-token=''
            quay.io token (default $WERF_REPO_QUAY_TOKEN)
      --secondary-repo=[]
            Specify one or multiple secondary read-only repos with images that will be used as a    
            cache.
            Also, can be specified with $WERF_SECONDARY_REPO_* (e.g. $WERF_SECONDARY_REPO_1=...,    
            $WERF_SECONDARY_REPO_2=...)
      --skip-tls-verify-registry=false
            Skip TLS certificate validation when accessing a registry (default                      
            $WERF_SKIP_TLS_VERIFY_REGISTRY)
  -S, --synchronization=''
            Address of synchronizer for multiple werf processes to work with a single repo.
            
            Default:
             - $WERF_SYNCHRONIZATION, or
             - :local if --repo is not specified, or
             - https://synchronization.werf.io if --repo has been specified.
            
            The same address should be specified for all werf processes that work with a single     
            repo. :local address allows execution of werf processes from a single host only
      --tmp-dir=''
            Use specified dir to store tmp files and dirs (default $WERF_TMP_DIR or system tmp dir)