Publish bundle into the container registry. werf bundle
contains built images defined in the werf.yaml
, Helm chart, Service values which contain built images tags, any custom values and set values params provided during publish invocation, werf addon templates (like werf_image
).
Published into container registry bundle can be rolled out by the werf bundle
command.
Syntax
werf bundle publish [IMAGE_NAME...] [options]
Options
--add-annotation=[]
Add annotation to deploying resources (can specify multiple).
Format: annoName=annoValue.
Also, can be specified with $WERF_ADD_ANNOTATION_* (e.g.
$WERF_ADD_ANNOTATION_1=annoName1=annoValue1,
$WERF_ADD_ANNOTATION_2=annoName2=annoValue2)
--add-custom-tag=[]
Set tag alias for the content-based tag.
The alias may contain the following shortcuts:
- %image%, %image_slug% or %image_safe_slug% to use the image name (necessary if there
is more than one image in the werf config);
- %image_content_based_tag% to use a content-based tag.
For cleaning custom tags and associated content-based tag are treated as one.
Also can be defined with $WERF_ADD_CUSTOM_TAG_* (e.g.
$WERF_ADD_CUSTOM_TAG_1="%image%-tag1", $WERF_ADD_CUSTOM_TAG_2="%image%-tag2")
--add-label=[]
Add label to deploying resources (can specify multiple).
Format: labelName=labelValue.
Also, can be specified with $WERF_ADD_LABEL_* (e.g.
$WERF_ADD_LABEL_1=labelName1=labelValue1, $WERF_ADD_LABEL_2=labelName2=labelValue2)
--allowed-docker-storage-volume-usage=70
Set allowed percentage of docker storage volume usage which will cause cleanup of least
recently used local docker images (default 70% or
$WERF_ALLOWED_DOCKER_STORAGE_VOLUME_USAGE)
--allowed-docker-storage-volume-usage-margin=5
During cleanup of least recently used local docker images werf would delete images
until volume usage becomes below "allowed-docker-storage-volume-usage -
allowed-docker-storage-volume-usage-margin" level (default 5% or
$WERF_ALLOWED_DOCKER_STORAGE_VOLUME_USAGE_MARGIN)
--allowed-local-cache-volume-usage=70
Set allowed percentage of local cache (~/.werf/local_cache by default) volume usage
which will cause cleanup of least recently used data from the local cache (default 70%
or $WERF_ALLOWED_LOCAL_CACHE_VOLUME_USAGE)
--allowed-local-cache-volume-usage-margin=5
During cleanup of least recently used local docker images werf would delete images
until volume usage becomes below "allowed-docker-storage-volume-usage -
allowed-docker-storage-volume-usage-margin" level (default 5% or
$WERF_ALLOWED_LOCAL_CACHE_VOLUME_USAGE_MARGIN)
--build-report-path=''
Change build report path and format (by default $WERF_BUILD_REPORT_PATH or
".werf-build-report.json" if not set). Extension must be either .json for JSON format
or .env for env-file format. If extension not specified, then .json is used
--cache-repo=[]
Specify one or multiple cache repos with images that will be used as a cache. Cache
will be populated when pushing newly built images into the primary repo and when
pulling existing images from the primary repo. Cache repo will be used to pull images
and to get manifests before making requests to the primary repo.
Also, can be specified with $WERF_CACHE_REPO_* (e.g. $WERF_CACHE_REPO_1=...,
$WERF_CACHE_REPO_2=...)
--config=''
Use custom configuration file (default $WERF_CONFIG or werf.yaml in working directory)
--config-templates-dir=''
Custom configuration templates directory (default $WERF_CONFIG_TEMPLATES_DIR or .werf
in working directory)
--container-registry-mirror=[]
(Buildah-only) Use specified mirrors for docker.io
--dev=false
Enable development mode (default $WERF_DEV).
The mode allows working with project files without doing redundant commits during
debugging and development
--dev-branch='_werf-dev'
Set dev git branch name (default $WERF_DEV_BRANCH or "_werf-dev")
--dev-ignore=[]
Add rules to ignore tracked and untracked changes in development mode (can specify
multiple).
Also, can be specified with $WERF_DEV_IGNORE_* (e.g. $WERF_DEV_IGNORE_TESTS=*_test.go,
$WERF_DEV_IGNORE_DOCS=path/to/docs)
--dir=''
Use specified project directory where project’s werf.yaml and other configuration files
should reside (default $WERF_DIR or current working directory)
--disable-auto-host-cleanup=false
Disable auto host cleanup procedure in main werf commands like werf-build,
werf-converge and other (default disabled or WERF_DISABLE_AUTO_HOST_CLEANUP)
--disable-default-secret-values=false
Do not use secret values from the default .helm/secret-values.yaml file (default
$WERF_DISABLE_DEFAULT_SECRET_VALUES or false)
--disable-default-values=false
Do not use values from the default .helm/values.yaml file (default
$WERF_DISABLE_DEFAULT_VALUES or false)
--docker-config=''
Specify docker config directory path. Default $WERF_DOCKER_CONFIG or $DOCKER_CONFIG or
~/.docker (in the order of priority)
Command needs granted permissions to read, pull and push images into the specified repo
and to pull base images
--docker-server-storage-path=''
Use specified path to the local docker server storage to check docker storage volume
usage while performing garbage collection of local docker images (detect local docker
server storage path by default or use $WERF_DOCKER_SERVER_STORAGE_PATH)
--env=''
Use specified environment (default $WERF_ENV)
--final-repo=''
Container registry storage address (default $WERF_FINAL_REPO)
--final-repo-container-registry=''
Choose final-repo container registry implementation.
The following container registries are supported: ecr, acr, default, dockerhub, gcr,
github, gitlab, harbor, quay, selectel.
Default $WERF_FINAL_REPO_CONTAINER_REGISTRY or auto mode (detect container registry by
repo address).
--final-repo-docker-hub-password=''
final-repo Docker Hub password (default $WERF_FINAL_REPO_DOCKER_HUB_PASSWORD)
--final-repo-docker-hub-token=''
final-repo Docker Hub token (default $WERF_FINAL_REPO_DOCKER_HUB_TOKEN)
--final-repo-docker-hub-username=''
final-repo Docker Hub username (default $WERF_FINAL_REPO_DOCKER_HUB_USERNAME)
--final-repo-github-token=''
final-repo GitHub token (default $WERF_FINAL_REPO_GITHUB_TOKEN)
--final-repo-harbor-password=''
final-repo Harbor password (default $WERF_FINAL_REPO_HARBOR_PASSWORD)
--final-repo-harbor-username=''
final-repo Harbor username (default $WERF_FINAL_REPO_HARBOR_USERNAME)
--final-repo-quay-token=''
final-repo quay.io token (default $WERF_FINAL_REPO_QUAY_TOKEN)
--final-repo-selectel-account=''
final-repo Selectel account (default $WERF_FINAL_REPO_SELECTEL_ACCOUNT)
--final-repo-selectel-password=''
final-repo Selectel password (default $WERF_FINAL_REPO_SELECTEL_PASSWORD)
--final-repo-selectel-username=''
final-repo Selectel username (default $WERF_FINAL_REPO_SELECTEL_USERNAME)
--final-repo-selectel-vpc=''
final-repo Selectel VPC (default $WERF_FINAL_REPO_SELECTEL_VPC)
--final-repo-selectel-vpc-id=''
final-repo Selectel VPC ID (default $WERF_FINAL_REPO_SELECTEL_VPC_ID)
--git-work-tree=''
Use specified git work tree dir (default $WERF_WORK_TREE or lookup for directory that
contains .git in the current or parent directories)
--giterminism-config=''
Custom path to the giterminism configuration file relative to working directory
(default $WERF_GITERMINISM_CONFIG or werf-giterminism.yaml in working directory)
-C, --helm-compatible-chart=false
Set chart name in the Chart.yaml of the published chart to the last path component of
container registry repo (for REGISTRY/PATH/TO/REPO address chart name will be REPO,
more info https://helm.sh/docs/topics/registries/#oci-feature-deprecation-and-behavior-c
hanges-with-v370). In helm compatibility mode chart is fully conforming with the helm
OCI registry requirements. Default false or $WERF_HELM_COMPATIBLE_CHART.
--home-dir=''
Use specified dir to store werf cache files and dirs (default $WERF_HOME or ~/.werf)
--ignore-secret-key=false
Disable secrets decryption (default $WERF_IGNORE_SECRET_KEY)
--insecure-helm-dependencies=false
Allow insecure oci registries to be used in the .helm/Chart.yaml dependencies
configuration (default $WERF_INSECURE_HELM_DEPENDENCIES)
--insecure-registry=false
Use plain HTTP requests when accessing a registry (default $WERF_INSECURE_REGISTRY)
--introspect-before-error=false
Introspect failed stage in the clean state, before running all assembly instructions of
the stage
--introspect-error=false
Introspect failed stage in the state, right after running failed assembly instruction
--introspect-stage=[]
Introspect a specific stage. The option can be used multiple times to introspect
several stages.
There are the following formats to use:
* specify IMAGE_NAME/STAGE_NAME to introspect stage STAGE_NAME of either image or
artifact IMAGE_NAME
* specify STAGE_NAME or */STAGE_NAME for the introspection of all existing stages with
name STAGE_NAME
IMAGE_NAME is the name of an image or artifact described in werf.yaml, the nameless
image specified with ~.
STAGE_NAME should be one of the following: from, beforeInstall,
dependenciesBeforeInstall, gitArchive, install, dependenciesAfterInstall, beforeSetup,
dependenciesBeforeSetup, setup, dependenciesAfterSetup, gitCache, gitLatestPatch,
dockerInstructions, dockerfile
--kube-config=''
Kubernetes config file path (default $WERF_KUBE_CONFIG, or $WERF_KUBECONFIG, or
$KUBECONFIG)
--kube-config-base64=''
Kubernetes config data as base64 string (default $WERF_KUBE_CONFIG_BASE64 or
$WERF_KUBECONFIG_BASE64 or $KUBECONFIG_BASE64)
--kube-context=''
Kubernetes config context (default $WERF_KUBE_CONTEXT)
--log-color-mode='auto'
Set log color mode.
Supported on, off and auto (based on the stdout’s file descriptor referring to a
terminal) modes.
Default $WERF_LOG_COLOR_MODE or auto mode.
--log-debug=false
Enable debug (default $WERF_LOG_DEBUG).
--log-pretty=true
Enable emojis, auto line wrapping and log process border (default $WERF_LOG_PRETTY or
true).
--log-project-dir=false
Print current project directory path (default $WERF_LOG_PROJECT_DIR)
--log-quiet=false
Disable explanatory output (default $WERF_LOG_QUIET).
--log-terminal-width=-1
Set log terminal width.
Defaults to:
* $WERF_LOG_TERMINAL_WIDTH
* interactive terminal width or 140
--log-time=false
Add time to log entries for precise event time tracking (default $WERF_LOG_TIME or
false).
--log-time-format='2006-01-02T15:04:05Z07:00'
Specify custom log time format (default $WERF_LOG_TIME_FORMAT or RFC3339 format).
--log-verbose=false
Enable verbose output (default $WERF_LOG_VERBOSE).
--loose-giterminism=false
Loose werf giterminism mode restrictions
-p, --parallel=true
Run in parallel (default $WERF_PARALLEL or true)
--parallel-tasks-limit=5
Parallel tasks limit, set -1 to remove the limitation (default
$WERF_PARALLEL_TASKS_LIMIT or 5)
--platform=[]
Enable platform emulation when building images with werf, format: OS/ARCH[/VARIANT]
($WERF_PLATFORM or $DOCKER_DEFAULT_PLATFORM by default)
--rename-chart=''
Force setting of chart name in the Chart.yaml of the published chart to the specified
value (can be set by the $WERF_RENAME_CHART, no rename by default, could not be used
together with the `--helm-compatible-chart` option).
--repo=''
Container registry storage address (default $WERF_REPO)
--repo-container-registry=''
Choose repo container registry implementation.
The following container registries are supported: ecr, acr, default, dockerhub, gcr,
github, gitlab, harbor, quay, selectel.
Default $WERF_REPO_CONTAINER_REGISTRY or auto mode (detect container registry by repo
address).
--repo-docker-hub-password=''
repo Docker Hub password (default $WERF_REPO_DOCKER_HUB_PASSWORD)
--repo-docker-hub-token=''
repo Docker Hub token (default $WERF_REPO_DOCKER_HUB_TOKEN)
--repo-docker-hub-username=''
repo Docker Hub username (default $WERF_REPO_DOCKER_HUB_USERNAME)
--repo-github-token=''
repo GitHub token (default $WERF_REPO_GITHUB_TOKEN)
--repo-harbor-password=''
repo Harbor password (default $WERF_REPO_HARBOR_PASSWORD)
--repo-harbor-username=''
repo Harbor username (default $WERF_REPO_HARBOR_USERNAME)
--repo-quay-token=''
repo quay.io token (default $WERF_REPO_QUAY_TOKEN)
--repo-selectel-account=''
repo Selectel account (default $WERF_REPO_SELECTEL_ACCOUNT)
--repo-selectel-password=''
repo Selectel password (default $WERF_REPO_SELECTEL_PASSWORD)
--repo-selectel-username=''
repo Selectel username (default $WERF_REPO_SELECTEL_USERNAME)
--repo-selectel-vpc=''
repo Selectel VPC (default $WERF_REPO_SELECTEL_VPC)
--repo-selectel-vpc-id=''
repo Selectel VPC ID (default $WERF_REPO_SELECTEL_VPC_ID)
--report-format=''
DEPRECATED: use --save-build-report with optional --build-report-path.
Report format: json or envfile (json or $WERF_REPORT_FORMAT by default) json:
{
"Images": {
"<WERF_IMAGE_NAME>": {
"WerfImageName": "<WERF_IMAGE_NAME>",
"DockerRepo": "<REPO>",
"DockerTag": "<TAG>"
"DockerImageName": "<REPO>:<TAG>",
"DockerImageID": "<SHA256>",
"DockerImageDigest": "<SHA256>",
},
...
}
}
envfile:
WERF_<FORMATTED_WERF_IMAGE_NAME>_DOCKER_IMAGE_NAME=<REPO>:<TAG>
...
<FORMATTED_WERF_IMAGE_NAME> is werf image name from werf.yaml modified according to the
following rules:
- all characters are uppercase (app -> APP);
- charset /- is replaced with _ (DEV/APP-FRONTEND -> DEV_APP_FRONTEND)
--report-path=''
DEPRECATED: use --save-build-report with optional --build-report-path.
Report save path ($WERF_REPORT_PATH by default)
-Z, --require-built-images=false
Requires all used images to be previously built and exist in repo. Exits with error if
needed images are not cached and so require to run build instructions (default
$WERF_REQUIRE_BUILT_IMAGES)
--save-build-report=false
Save build report (by default $WERF_SAVE_BUILD_REPORT or false). Its path and format
configured with --build-report-path
--secondary-repo=[]
Specify one or multiple secondary read-only repos with images that will be used as a
cache.
Also, can be specified with $WERF_SECONDARY_REPO_* (e.g. $WERF_SECONDARY_REPO_1=...,
$WERF_SECONDARY_REPO_2=...)
--secret-values=[]
Specify helm secret values in a YAML file (can specify multiple). Also, can be defined
with $WERF_SECRET_VALUES_* (e.g. $WERF_SECRET_VALUES_ENV=.helm/secret_values_test.yaml,
$WERF_SECRET_VALUES_DB=.helm/secret_values_db.yaml)
--set=[]
Set helm values on the command line (can specify multiple or separate values with
commas: key1=val1,key2=val2).
Also, can be defined with $WERF_SET_* (e.g. $WERF_SET_1=key1=val1,
$WERF_SET_2=key2=val2)
--set-file=[]
Set values from respective files specified via the command line (can specify multiple
or separate values with commas: key1=path1,key2=path2).
Also, can be defined with $WERF_SET_FILE_* (e.g. $WERF_SET_FILE_1=key1=path1,
$WERF_SET_FILE_2=key2=val2)
--set-string=[]
Set STRING helm values on the command line (can specify multiple or separate values
with commas: key1=val1,key2=val2).
Also, can be defined with $WERF_SET_STRING_* (e.g. $WERF_SET_STRING_1=key1=val1,
$WERF_SET_STRING_2=key2=val2)
-L, --skip-dependencies-repo-refresh=false
Do not refresh helm chart repositories locally cached index
--skip-tls-verify-registry=false
Skip TLS certificate validation when accessing a registry (default
$WERF_SKIP_TLS_VERIFY_REGISTRY)
--ssh-key=[]
Use only specific ssh key(s).
Can be specified with $WERF_SSH_KEY_* (e.g. $WERF_SSH_KEY_REPO=~/.ssh/repo_rsa,
$WERF_SSH_KEY_NODEJS=~/.ssh/nodejs_rsa).
Defaults to $WERF_SSH_KEY_*, system ssh-agent or ~/.ssh/{id_rsa|id_dsa}
-S, --synchronization=''
Address of synchronizer for multiple werf processes to work with a single repo.
Default:
- $WERF_SYNCHRONIZATION, or
- :local if --repo is not specified, or
- https://synchronization.werf.io if --repo has been specified.
The same address should be specified for all werf processes that work with a single
repo. :local address allows execution of werf processes from a single host only
--tag='latest'
Publish bundle into container registry repo by the provided tag ($WERF_TAG or latest by
default)
--tmp-dir=''
Use specified dir to store tmp files and dirs (default $WERF_TMP_DIR or system tmp dir)
--use-custom-tag=''
Use a tag alias in helm templates instead of an image content-based tag (NOT
RECOMMENDED).
The alias may contain the following shortcuts:
- %image%, %image_slug% or %image_safe_slug% to use the image name (necessary if there
is more than one image in the werf config);
- %image_content_based_tag% to use a content-based tag.
For cleaning custom tags and associated content-based tag are treated as one.
Also, can be defined with $WERF_USE_CUSTOM_TAG (e.g. $WERF_USE_CUSTOM_TAG="%image%-tag")
--values=[]
Specify helm values in a YAML file or a URL (can specify multiple). Also, can be
defined with $WERF_VALUES_* (e.g. $WERF_VALUES_1=.helm/values_1.yaml,
$WERF_VALUES_2=.helm/values_2.yaml)
--virtual-merge=false
Enable virtual/ephemeral merge commit mode when building current application state
($WERF_VIRTUAL_MERGE by default)
--without-images=false
Disable building of images defined in the werf.yaml (if any) and usage of such images
in the .helm/templates ($WERF_WITHOUT_IMAGES or false by default — e.g. enable all
images defined in the werf.yaml by default)